Below we will answer the most asked questions. If you need any further information, please phone us on (07) 5495 3180 or email mcgrawdesigns@bigpond.com

How do I check the sizing?

If you follow the directions on our sizing page or download our sizing chart (in PDF format) you should be able to calculate the sizes. We use standard Australian sizing - this tends to be a little smaller than some of the imported uniforms.

Do you have a minimum quantity?

We normally set a minimum of 8 units per style. If you need less, a surcharge will apply. The biggest issue tends to be someone leaving the team and taking the uniform with them. We suggest ordering at least one more uniform than required just to have a spare.

What materials are available?

The singlets, shorts and warmup tops are made using either of two fabrics. 100% Polyester Mock Mesh - this is a solid fabric (no holes) which has a dimpled surface to appear like Mesh or 100% Polyester Super Sheen - this is a flat jersey fabric with a shiny surface. We use a 100% Polyester Eyelet Mesh fabric for the reversible training singlets. We don’t use the Micro Mesh as we find this tends to cling too much. All fabrics used are milled in Australia.

What Numbers can I use on the Singlets?

Legal numbers are normally 4 to 15, 20-25, 30-35, 40-45 & 50-55. Numbers outside these are usually illegal as they interfere with referees calls. However, some associations will allow other numbers - we suggest you check before ordering.

I have downloaded a style template, how do I colour it in?

After downloading a style template you can use most bitmap colour programs - such as the Paint program built into Microsoft Windows. Click here for tips on how to do this.

How do I order?

You can download an Order Sheet in a PDF format. You can either fax or Post this back to us. Alternatively you can send an e-mail with the relevant information. We do not accept orders over the phone as details can sometimes become confused.

How long before the goods are ready?

All uniforms, warmup tops and reversible training gear are made to order. Delivery is approximately 4 to 6 weeks depending on the time of year. The ready made gear is normally available as stock lines from our suppliers - delivery will vary depending on detailing required, however goods should be available in around 1 to 2 weeks. As the ready made gear is imported there are sometimes stock delays, we will inform you of any delays.

Are your products Australian Made?

All uniforms, warmup tops and reversible training gear are made in Australia at our Caboolture headquarters, using Australian milled fabrics . Our socks are also made in Australia. Most of the ready made gear is imported.

How do you deliver?

Goods are delivered by Courier in South East Queensland. Australia Post is used for everywhere else.